P0190 — Fuel Rail Pressure Sensor A Circuit Malfunction
Category: Powertrain Severity: High
Updated:
DTC code P0190 means: Fuel Rail Pressure Sensor A Circuit Malfunction. It falls under the "Powertrain" category, with an estimated severity of High. Common causes include failed fuel rail pressure sensor, corroded or loose connector and damaged wiring; it's worth confirming the diagnosis before replacing parts.
Possible causes
- Failed fuel rail pressure sensor
- Corroded or loose connector
- Damaged wiring
- Missing 5 V reference
Symptoms
- No start or hard start
- Limp mode
- Stumbling
- Check engine light
How to diagnose it step by step
- Check the connector.
- Measure reference, ground and signal.
- Compare the reading with the engine off (≈0).
- Replace the sensor.
How to fix it
Check the sensor connector (on the rail) and measure the 5 V reference. If wiring is fine, replace the sensor; on many diesels it is integrated into the rail.
Estimated repair cost
Sensor: $100–300; $400–900 if integrated into the rail.
Frequently asked questions
What does DTC code P0190 mean?
Fuel Rail Pressure Sensor A Circuit Malfunction.
Is code P0190 serious?
Severity High. Have it checked as soon as possible, especially if it affects safety or the catalytic converter.
Can I keep driving with code P0190?
Not recommended: the engine may stall.
Related codes
P0191 P0193 P0175 P0174 P0172 P0171 P0161 P0157 P0156 P0155
Refine by car make
🛒 Buy mass air flow sensor (MAF) at Autodoc (affiliate link)