P0341 — Camshaft Position Sensor Circuit Range/Performance (Bank 1)
Category: Powertrain Severity: Medium
Updated:
DTC code P0341 means: Camshaft Position Sensor Circuit Range/Performance (Bank 1). It falls under the "Powertrain" category, with an estimated severity of Medium. Common causes include faulty camshaft sensor, timing out of phase and damaged cam target wheel; it's worth confirming the diagnosis before replacing parts.
Possible causes
- Faulty camshaft sensor
- Timing out of phase
- Damaged cam target wheel
- Wiring interference
Symptoms
- Long cranking
- Stumbling
- Higher fuel consumption
- Check engine light
How to diagnose it step by step
- Check the sensor and connector.
- Check the signal with an oscilloscope.
- Verify timing.
- Replace the sensor if needed.
How to fix it
If the sensor is fine, check timing: a belt or chain that has jumped a tooth triggers this code.
Estimated repair cost
Sensor: $30–150. Timing job: $400–2,000.
Frequently asked questions
What does DTC code P0341 mean?
Camshaft Position Sensor Circuit Range/Performance (Bank 1).
Is code P0341 serious?
Severity Medium. Not urgent, but worth diagnosing to avoid bigger damage.
Can I keep driving with code P0341?
Drive carefully until checked.
Related codes
P0340 P0344 P0345 P0336 P0335 P0332 P0351 P0352 P0353 P0354
Refine by car make
🛒 Buy spark plugs and ignition coils at Autodoc (affiliate link)