P0602 — Control Module Programming Error
Category: Powertrain Severity: High
Updated:
DTC code P0602 means: Control Module Programming Error. It falls under the "Powertrain" category, with an estimated severity of High. Common causes include eCM/PCM software not programmed correctly or corrupted, low or unstable battery voltage during a previous update and internal ECM/PCM hardware fault; it's worth confirming the diagnosis before replacing parts.
Possible causes
- ECM/PCM software not programmed correctly or corrupted
- Low or unstable battery voltage during a previous update
- Internal ECM/PCM hardware fault
Symptoms
- Check engine light on
- Erratic engine behavior or stalling
- Other modules may also show faults
- Vehicle may fail to start in severe cases
How to diagnose it step by step
- Check whether the ECU was recently replaced.
- Program the ECU with the correct software.
- Keep the battery supported during programming.
How to fix it
This code points to the engine computer itself. Check battery voltage and connections first (a weak battery during a software update is a common cause). If the fault persists, the ECM/PCM usually needs reprogramming or replacement at a specialized workshop or dealer.
Estimated repair cost
Programming: $100–250.
Frequently asked questions
What does DTC code P0602 mean?
Control Module Programming Error.
Is code P0602 serious?
Severity High. Have it checked as soon as possible, especially if it affects safety or the catalytic converter.
Can I keep driving with code P0602?
Carefully; it may need programming to run properly.
Related codes
P0601 P0603 P0600 P0604 P0605 P0606 P0615 P0620 P0627 P0641
Refine by car make
🛒 Buy engine control unit (ECU) at Autodoc (affiliate link)