P0715 — Input/Turbine Speed Sensor A Circuit Malfunction
Category: Powertrain Severity: Medium
Updated:
DTC code P0715 means: Input/Turbine Speed Sensor A Circuit Malfunction. It falls under the "Powertrain" category, with an estimated severity of Medium. Common causes include low or degraded transmission fluid, faulty speed sensor or solenoid for the affected gear/shaft and wiring/connector issue; it's worth confirming the diagnosis before replacing parts.
Possible causes
- Low or degraded transmission fluid
- Faulty speed sensor or solenoid for the affected gear/shaft
- Wiring/connector issue
- Internal transmission wear (worn clutch pack or band)
Symptoms
- Harsh, delayed or slipping shifts
- Transmission may enter limp/failsafe mode (stuck in one gear)
- Check engine light on
- Unusual noise when shifting
How to diagnose it step by step
- Check ATF level and condition.
- Check the input speed sensor connector.
- Test the sensor.
- Replace the sensor.
How to fix it
Start by checking the transmission fluid level and condition — many of these codes trace back to low or old fluid. If the fluid is fine, the affected sensor or solenoid is the next suspect; internal mechanical wear is the last, more expensive possibility and usually needs a specialist.
Estimated repair cost
$100–300 installed.
Frequently asked questions
What does DTC code P0715 mean?
Input/Turbine Speed Sensor A Circuit Malfunction.
Is code P0715 serious?
Severity Medium. Not urgent, but worth diagnosing to avoid bigger damage.
Can I keep driving with code P0715?
Carefully; the transmission may stay in one gear.
Related codes
P0717 P0711 P0710 P0720 P0706 P0705 P0700 P0730 P0731 P0732
Refine by car make
🛒 Buy transmission parts at Autodoc (affiliate link)