P0136 — 02 Sensor Circuit Malfunction (Bank I Sensor 2)
Category: Powertrain Severity: Medium
Updated:
DTC code P0136 means: 02 Sensor Circuit Malfunction (Bank I Sensor 2). It falls under the "Powertrain" category, with an estimated severity of Medium. Common causes include faulty oxygen (O2) sensor (Bank 1 Sensor 2), wiring or connector damage/corrosion and exhaust leak near the sensor; it's worth confirming the diagnosis before replacing parts.
Possible causes
- Faulty oxygen (O2) sensor (Bank 1 Sensor 2)
- Wiring or connector damage/corrosion
- Exhaust leak near the sensor
- Blown fuse (if heater-related)
Symptoms
- Check engine light on
- Increased fuel consumption
- Rough idle in some cases
- Possible failed emissions test
How to diagnose it step by step
- Check the downstream sensor connector.
- Measure heater and signal.
- Look for exhaust leaks.
- Replace the sensor.
How to fix it
Inspect the wiring and connector of the Bank 1 Sensor 2 oxygen sensor for damage or corrosion, and check for exhaust leaks nearby. If both are fine, the sensor itself is most likely faulty and should be replaced — O2 sensors wear out over time and don't have a simple repair.
Estimated repair cost
$100–280.
Frequently asked questions
What does DTC code P0136 mean?
02 Sensor Circuit Malfunction (Bank I Sensor 2).
Is code P0136 serious?
Severity Medium. Not urgent, but worth diagnosing to avoid bigger damage.
Can I keep driving with code P0136?
Yes, it is safe to drive.
Related codes
P0135 P0137 P0134 P0138 P0133 P0139 P0132 P0131 P0130 P0140
Refine by car make
🛒 Buy mass air flow sensor (MAF) at Autodoc (affiliate link)